Tent poles are the skeleton of one’s exterior shelter, offering structure to keep the tent upright.

Tent poles are the skeleton of one’s exterior shelter, offering structure to keep the tent upright.

If a pole rests, your very own tent may wobble, flapping or fully fall, as a result it’s wise to be well prepared using necessary tools and knowhow to repair a damaged pole. In this essay, we’ll coach you on how exactly to:

  • Splint a faulty tent pole: discover ways to use a repair arm or a tent risk as a splint to repair a pole while you’re elsewhere.
  • Exchange shockcord: Discover how to create an at-home cure when stretchy shockcord inside your tent pole pauses or wears out and about.

Expert maintenance: if you require specialized help, a lot of REI shop can do fundamental repairs. An excellent choice is TentPole innovations, the nation’s top pole restoration assistance.

Splinting A Faulty Tent Pole

Whether the tent pole gets walked on or a strong gust of wind does indeed damages, a kinked, separate or snapped pole needs immediate eyes in that specific market (when you get house, possible consider keeping pole exchanged or expertly repaired.) You have two choices:

  • Need a pole repairs sleeve
  • Utilize a tent stake as a splint

Using a Pole Service Case

An easy and best technique to hit a damaged pole is with a-pole cure case. Also referred to as a splint, this shorter tube can be provided by the tent. If not, purchase one and transport it with you. An effective pole repairs sleeve is probably relatively larger in size than your own pole so that it does not move in excess. Making use of a repair arm to improve a broken tent pole is simple:

  1. Get hold the damaged pole pieces.
  2. If pole happens to be curved not fully destroyed, gently straighten out the twist.
  3. Slide the case in the pole end until it’s based over the bust or kink; you could have to make use of pliers to crimp or a stone to distort splayed components to ensure the arm can slide over these people.
  4. Place each end of the sleeve/pole once or twice with duct record, or whatever heavy-duty tape you have along.
  5. If the pole fails where one pole conclusion positions into subsequent one, you’re going to have to splint the parts along; remember the fact that that should stop the poles from folding upwards beautifully at the time you have tent out.

Utilizing a Tent share as a Splint

If you decide to’ve lost or ignored your very own pole service arm, you are able to a tent stake to cook up a crude splint:

  1. Line-up the broken pole areas.
  2. If your pole was twisted but not completely busted, look into the flex.
  3. Align the wager so it’s centered next to the split.
  4. Place each end of the stake/pole several times with duct tape, or whatever heavy tape you really have on hand.

Ideas Exchange Tent-Pole Shockcord

Over the years, the stretchy shockcord that’s within your tent rods could get abraded and break or simply shed their suppleness. If shockcord splits while you’re on the go, possible still use the pole by very carefully arranging individual segments. However, once you get home, you’ll wish change the shockcord; it can make construction simple and easy keeps you against shedding a-pole area. The good thing is, changing its an easy techniques.

Here’s exactly what you’ll require:

  • A long-lasting sign
  • Masking record (discretionary)
  • Scissors
  • Securing pliers (elective)
  • Brand new 1/8-in.-diameter shockcord (roughly the length of their tent pole)

Here’s just how to exchange the shockcord:

  1. Start by putting the tent pole out straight. To prevent blending up sections, you’ll name involving them with a permanent marker (use masking tape if you should don’t like to compose directly on the pole.)
  2. Snip the old cord, then pull the elastic out from a pole end; take care to keep all of the pole sections in the same order and orientation whilst work.
  3. Some tent posts bring modest material section each and every conclusion in which the cable is linked; be on the lookout of these and dont lose all of them!
  4. Unknot the ends and lie the old cable down beside the shockcord; slice the new element of shockcord to suit the total amount of the main.
  5. If your old shockcord is stretched out no much longer elastic, cut the brand new area about 8 in quicker versus previous one.
  6. Link a knot in a single end of the shockcord, after that feed then the other stop through almost the past pole section.
  7. Reach the shockcord to extend the size, next wrap a short-term knot maintain they from moving back once again in the second-to-last pole segment; alternatively, you are able to a couple of locking pliers to hang the string.
  8. Feed the rest of the shockcord with the closing pole area and knot the tip.
  9. Go back and untie (or unclamp) the string within definitive two-pole parts. Double-check that pole areas right now seat tightly through the fully customized pole.
  10. If the shockcord is still relaxed, untie one end and take off 6 in at once through to the poles are held together completely whenever set up. Try not to over-shorten the cord.
  11. Unseat the parts and fold up up the pole, starting up inside the middle place.

Leave a comment

To share your experiences & also leave your comments